How to finish drywall. 

Step by step instructions 0n Finisfing drywall holes. 

Video 1 title

This is an example of a Vimeo video, just edit the change the video link, edit the title and this description and if you like, you can also link the continue button to a web page....

Video 2 title

This is an example of a Vimeo video, just edit the change the video link, edit the title and this description and if you like, you can also link the continue button to a web page....

Video 3 title

This is an example of a Vimeo video, just edit the change the video link, edit the title and this description and if you like, you can also link the continue button to a web page....

Video 4 title

This is an example of a Vimeo video, just edit the change the video link, edit the title and this description and if you like, you can also link the continue button to a web page....

Heading 1

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

Heading 2

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

Heading 3

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

Heading 4

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

 
Bookmark and Share
get in touch

Header Content Region

Insert text, image or banner ads here, or just delete this text and leave this area blank!

Pine Paneling Installation

Tongue and groove pine offers a warm, attractive finish that’s especially suited for walls and vaulted ceilings.

 

Bathroom Faucet Installation

One piece bathroom faucets, with either one or two handles are the most popular fixtures. Step by step instructions on installing bathroom faucets

Granite Tile Countertops

The hottest countertop material for kitchens, bathrooms, and patios today is natural stone. Step by step instructions on installing granite tile.

 

Main Menu:

 

Wood Decks

How to build a deck.

A deck may be one of the best single investments you can make in your house. It gives you added space, opens the house up to the yard, and ties indoor activities with outdoor activities. You can entertain on it, eat on it cook on it or just lounge around on it. Start planning your deck today. Its a great do-it-yourself project.

Log Homes

Modular Log Home

Pictures of a Blue Ridge Modular log home being install by a large crane. This modular log home sets on a full basement and was install in a day

        Outdoor lighting

Installing low voltage lighting.

Here is a way to provide pleasant illumination to outdoor areas for a small amount of money. You can purchase most of the components in a kit. Some kits come with a timer or a photovoltaic sensor to turn lights on at night and off during the day. Installing low voltage lighting is a good do-it-yourself project.

 

   Finishing Sheetrock

 

On the subject of finishing sheetrock or taping and mudding drywall, you may need to know the procedure. There's a order in addition to technique to every step. Should you complete every one of the steps correctly, you may finish up using the best results possible.

First we are going to cover how the specialists are finishing sheetrock. In case you are running your job or should you hired a drywall contractor to look after it for you personally, it will be a good suggestion to get a clear understanding with the procedure. Catching blunders near the beginning will save you days in your timetable, and obtain you a top quality job!

When a specialist business also comes in, they will ensure that all of the masking is it is in place before they begin to generate a mess. With regards to finishing sheetrock work, this can be very messy. There are actually multiple coats of mud and sanding. The very first thing they will do, is mask and cover up all finished products that you want to keep clean. Cover up all windows, fireplaces, floors, anything that may be finished! As soon as they finish the masking, they're able to start taping mudding drywall.

 

Pre-Fill Drywall Holes

Pre-Fill. Through the installation process, sometimes the installers make blunders and leave gaps or cut holes to big. The specialists which are finishing sheetrock will mix up a little "hot mud" or chemically setting joint compound, after that fill almost all these gaps or over cuts. The hot mud will developed in 20, 45 or 90 minutes, according to which kind they purchased. It will not shrink very much, which enable it to be coated right away. As soon as the pre-fill is finished, they may be able to spot nails and run the tape.

 

 

 

 

Screws, Nails, Outside Corners,

Taping Of The Flat Joints And Angles on the drywall

 Subject to crew size, the drywall company will start with either the nails and screws or run the tape on every one of the flat joints, butt joints and angles. Whether or not it is a smaller crew they may start with one of these after which move onto the other. A sizable crew will do both at the exact same time. Once they finish these two items, they may move onto the metal corner bead. On your outside corners, the crew will apply a coat of drywall mud to them. Usually using a 8 inch or 10 inch knife. This really is step one in your drywall finish process. All the mud has to dry prior to you can apply the following coat.

 

First Coat Of Mud Over The Flat And Butt Joints of the drywall

The following step in finishing sheetrock is always to coat every one of the flat joints and butt joints. This is accomplished by hand getting a 8 inch or 10 inch taping knife, for small jobs or having a taping box. The secret is to fill the joint but never to over crown it. It would be best to look for this whenever you inspect the drywall companies work. An effective way to test and check if the joint is over crowned or hallow is to place a ten inch or 12 inch knife over the joint and check if it rocks or if you could "see daylight" between the knife and joint.

 

Drywall Second Coat Of Mud On The Screws,

Nails, And Outside Corner Metal

 

Once the joints possess a coat on them, the drywall company will put an additional coat over the screws and nails. Also, they may apply another coat of mud on the outside corner metal. At now they may check and see if they need any patches over the electrical outlets or plumbing pipes. They may tape and mud any gaps.

 

 

 

Second Coat Of Mud On The Flat And Butt Joints

After the final coat of mud dries, it will likely be ready for the following coat. Thus far we now have taped every one of the joints, and ran a coat of mud on them. The angles have only been taped. The nails and screws have two coats of mud on them. So do the outside corner metal. The following step to finishing sheetrock is going to be to apply another coat of mud on the flat and butt joints. Subject to what kind of tools that were used in the final coat, the company will use the following size up. If the very first coat was applied using a 8 inch knife or even a 8 in box, you can use the following size up. 10 inch knife or 10 inch box. Prior to you apply the coat, it would be best to sand or scrape down any lap lines or edges.

 

First Coat Of Mud In The Angles

As soon as the applying of a 2nd coat of mud over the flat and butt joints, the drywall company will apply a coat of mud over the angles. If they're applying this coat by hand, they may use a inside corner tool. If they're using a automatic taping tool, they may do that using a angle box. Before they apply this coat, they are going to lightly sand the angles to get rid of any edges or lap lines.

Third Coat Of Mud On The Screws And Nails

For many finishes, the final step in finishing sheetrock, would be the final coat for your screws and nails. It has to be applied by hand. The very first and second coat may be applied using a nail spotter tool, but the final coat must be applied by hand to make sure a high quality finish.

 

Sand And Touching Up The drywall

After the ultimate coat dries, the following step in finishing sheetrock or taping mudding drywall is usually to sand and touch up. For textured finishes, most drywall companies sand every one of the joints and angles. They may also lightly sand the screws and nails. The secret is never to over sand the edges. This will likely cause the edge paper to fuzz or stand up. This will show through the textured finish.

Now the taping phase is complete, you might be ready for wall texturing. What is wall texturing in the event you apply texturing to your walls and ceiling? Just how do you apply the texture?

 

 

 

 

  Finishing Drywall

 

1. To hide the joints between the sheets of drywall, apply drywall tape over the gaps. Drywall

tape could be self adhesive or nonstick. By way of self adhesive drywall tape, now push it into place. To

apply no adhesive drywall tape, first spread on a thin coat of joint compound, after which push the

drywall tape into the drywall joint compound with a wide blade putty knife.

 

 

2. Stick on to a primary coat of joint compound over the drywall tape and also the dimples from the drywall screws using a 6 inch wide drywall knife. Make the joint compound as even as possible. Consent to to dry after that lightly sand minor imperfections with sand paper wrapped around a wood block.

 

 

 3. Apply another coat using a wider drywall knife. Work the compound gently from the joint, feathering to generate a smooth transition. You might have to feather in phases permitting the joint compound to dry between coats. Give the walls a lightweight sanding between coats using a pole sander ( a tool which has a sanding pad attached to some pole) to knock off imperfections. When the ultimate layer is dry, rub the surface at a swirling motion with a slightly damp drywall sponge to get rid of any left over imperfections.

 

 

4. Sanding with drywall sand paper plus your all set for painting.

 

 

  Finishing drywall corners with joint compound.

 

1. To complete outside corners, cover them using a protective metal corner bead which is cut to length. Nail every 12 inches through the perforations. Run the drywall knife down the metal edge to fill the spaces with drywall joint compound.

 

 

2. Apply a layer of joint compound on the drywall on both sides of an inside corner. Push} drywall

tape into the corner using a corner tool or putty knife. Apply a thin layer of joint compound over the

drywall tape, and smooth the surface.

 

 

      

 

.

 

 

back to top