Gas Lines. 

How to install gas lines.... 

Video 1 title

This is an example of a Vimeo video, just edit the change the video link, edit the title and this description and if you like, you can also link the continue button to a web page....

Video 2 title

This is an example of a Vimeo video, just edit the change the video link, edit the title and this description and if you like, you can also link the continue button to a web page....

Video 3 title

This is an example of a Vimeo video, just edit the change the video link, edit the title and this description and if you like, you can also link the continue button to a web page....

Video 4 title

This is an example of a Vimeo video, just edit the change the video link, edit the title and this description and if you like, you can also link the continue button to a web page....

Heading 1

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

Heading 2

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

Heading 3

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

Heading 4

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

 
Bookmark and Share
get in touch

Header Content Region

Insert text, image or banner ads here, or just delete this text and leave this area blank!

Pine Paneling Installation

Tongue and groove pine offers a warm, attractive finish that’s especially suited for walls and vaulted ceilings.

 

Bathroom Faucet Installation

One piece bathroom faucets, with either one or two handles are the most popular fixtures. Step by step instructions on installing bathroom faucets

Granite Tile Countertops

The hottest countertop material for kitchens, bathrooms, and patios today is natural stone. Step by step instructions on installing granite tile.

 

Main Menu:

 

Wood Decks

How to build a deck.

A deck may be one of the best single investments you can make in your house. It gives you added space, opens the house up to the yard, and ties indoor activities with outdoor activities. You can entertain on it, eat on it cook on it or just lounge around on it. Start planning your deck today. Its a great do-it-yourself project.

Log Homes

Modular Log Home

Pictures of a Blue Ridge Modular log home being install by a large crane. This modular log home sets on a full basement and was install in a day

        Outdoor lighting

Installing low voltage lighting.

Here is a way to provide pleasant illumination to outdoor areas for a small amount of money. You can purchase most of the components in a kit. Some kits come with a timer or a photovoltaic sensor to turn lights on at night and off during the day. Installing low voltage lighting is a good do-it-yourself project.

   

Gas lines installation

 

Installing gas line is not troublesome, but it's dangerous and in many areas you merely aren't allowed to do it yourself. For those who select to proceed with the brand new gasoline line set up, begin by mapping out the place the brand new gasoline line will run and calculation what lengths of fuel pipe and which fittings you'll need. Begin on the supply pipe you'll be tying into and work forward. Also test together with your native building division to find out which type of pipe are allowed and which kind they advocate for your job. The variety of fuel home equipment a department line can assist is restricted by the diameter of the department and size of runs, so you will need to know exactly which different home equipment are serviced by the department you will tying into and the way a lot gas they consume. You'll need to acquire a allow and have your work inspected, so it is good to contain the inspections department up front. Black pipe threads are lower in a tapered method referred to as Nationwide Pipe Taper (NPT) The diameter of the male threaded pipe is smaller at the end. This is the reason it's simpler to thread a fitting on initially, but will get tougher with each turn. All threads ought to have pipe joint compound utilized before being fitted and all joints should be tested with leak detector resolution as soon as set up is complete.

 

 

 

 

Issues to know before installing fuel lines.

 

A. In most areas, a shut off valve, usually a ball valve have to be accessible inside three toes of the appliance and in the same room.

 

B. In case you are relocating a fuel line and cannot remove the existing department provide line due to restricted entry, you have to to cap the fuel stud out.

 

C. Most areas enable Kind K and Kind L copper tubing for installation in an LP fuel or pure fuel line.

 

D. Never use commonplace plumbing fittings with fuel pipe. Use solely gas rated, forged brass stopcocks for smaller pipe less than three inches dia. And use gas rated globe or gate valves for bigger pipe.

 

E. Horizontal pipe runs should terminate in a drip nipple that drops from the end to seize moisture and impurities. Make branch connections on the facet or prime of the gasoline pipe you are tying into. If you might want to drop down or up, run a branch line a minimum of 6 inches long straight out from the facet of the Gas black iron pipe and then drop down or go up with a 90 diploma union.

 

 

 

 

Putting in a gas line for your fireplace

 

1. Flip off the gas at the fuel meter or fuel tank. Disconnect the present appliance . If a versatile stainless steel connector was used, discard it, as they will only be installed once. Begin becoming the new pipe. Apply pipe compound or fuel fee, yellow PTFE tape to all male threads. After that you will hand tighten each joint, then tighten each pipe and becoming a minimum of one flip before shifting on to the subsequent section. You could need to tighten multiple flip to get the correct alignment.

 

 

2. Support fuel pipe runs with pipe hangers ensuring that the fuel line has a slight downward slope from the source toward the appliance. Install a T at the level the place the fuel pipe turns as much as go by means of the floor. Connect a short nipple and a cap on the entice crossbar of the T pointing down. This creates a drip nipple to entice any moisture within the gasoline line. Push the riser stub out pipe up by way of the gap in the floor.

 

  

           

3. Connect an accredited ¼-inch turn gas line valve to the riser stub out. After that you can apply pipe compound to the all male threads. Then you will use your adjustable wrench, do not use a pipe wrench, to tighten your  gas valve onto the stub out. With the valve off, restore gas line to the road at the meter or tank and take a look at all joints with leak detector solution. Connect a male threaded to flare adapter to the valve than connect the appliance connector tube to the valve. You might now use versatile stainless-steel connectors as an alternative of soppy copper tubing.

 

 

 

 

 

4. Hook up the equipment by attaching the other flare nut to the threaded fuel inlet port on the appliance. Turn on fuel foremost supply and at the stop valve and take a look at for leaks. Great job in your gasoline traces installation. Putting in gas line your self can prevent money.

 

 

How to install a gas fireplace

 

 

.

 

 

back to top